Gross Weight of the following goods: tiles, steps, risers package should not exceed 1100kgs. Gross Weight of paving stones package should not exceed 1500 kgs. The buyer agreement should be obtained in case packing over those limits.
Crate wood material should be good qulity, spunk is not accepted.
Crate bearing bars are should be at least 50*60mm in cut. Side bars to be located at the ends of crate. Central bar to be located at the center of the crate between two side bars.
Crate frame must be knocked together tightly and fasterned with wide metal stripe (clip) in the lower and upper part of vertical edge corner as per attached crate’s sheme.
Diagonal purlin bars must be located on the crate as per draw attached crate’s sheme.
Nails should not be knocked close to the board edge to avoid chips and damages of the products
There are no manufacturer trade mark on the crate, “N/M” should to be written instead of your company name.
Products to be wrapped with protecting film.
Tiles package and stowing requirements:
Tiles must be stowed face to face each other in vertical position.
Stowing into crates:
The stowing and qtty in each crate are subject to change upto each kind of products. The main requirements -each row to be separated with wooden core lining, the crate size to be as per following scheme: